WARPIG Tech Talk - Shocker - maxflo "pin" is a little long i think....


Home Pictures Technical Tournament Recreational Fields Stores
Beginner Info News And Articles Links Resources Video Contact Us Search

WARPIG Tech Talk - Shocker
maxflo "pin" is a little long i think....

[ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Shocker ]

Posted by screaming tree on December 06, 2001 at 01:32:05:

In Reply to: Remote to on-air problem posted by CJ7 on December 05, 2001 at 05:19:17:

have seen more than one impulse/shocker open tank before it has a chance to seat properly.
-i personnely think that the pin/stud that opens tank pin valve is a whisker long sometimes on the maxflo.
try putting spare o-ring inside asa so tank has something to seal against.
-but that is problematic.
otherwise get an on-off valve tank so you can screw it in and then open valve.

: My shocker is leaking every time I try to use my tank on the gun! If I hook up the remote it Doesn't leak any Ideas? By the way this is my first gun problem I've ran into and don't know that much about my shocker.

Follow Ups:

Re: maxflo "pin" is a little long i think.... Shockerpilot
06:24:41 12/24/01 (0)
Re: maxflo "pin" is a little long i think.... Ramones_4ever
12:10:47 12/09/01 (0)

Post a Followup

Show your name as:

E-Mail address (eg: joeschmoe@aol.com):

Show your e-mail address?

Your Password:

Don't have a password? CLICK HERE - Forgot your password? CLICK HERE

Subject:

Subject:Message:
: have seen more than one impulse/shocker open tank before it has a chance to seat properly. : -i personnely think that the pin/stud that opens tank pin valve is a whisker long sometimes on the maxflo. : try putting spare o-ring inside asa so tank has something to seal against. : -but that is problematic. : otherwise get an on-off valve tank so you can screw it in and then open valve. : : : My shocker is leaking every time I try to use my tank on the gun! If I hook up the remote it Doesn't leak any Ideas? By the way this is my first gun problem I've ran into and don't know that much about my shocker.

[ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Shocker ]

Copyright © 1992-2019 Corinthian Media Services.

WARPIG's webmasters can be reached through our feedback form. All articles and images are copyrighted and may not be redistributed without the written permission of their original creators and Corinthian Media Services. The WARPIG paintball page is a collection of information and pointers to sources from around the internet and other locations. As such, Corinthian Media Services makes no claims to the trustworthiness or reliability of said information. The information contained in, and referenced by WARPIG, should not be used as a substitute for safety information from trained professionals in the paintball industry.