WARPIG Tech Talk - Shocker - OK THANKS MAN...


Home Pictures Technical Tournament Recreational Fields Stores
Beginner Info News And Articles Links Resources Video Contact Us Search

WARPIG Tech Talk - Shocker
OK THANKS MAN...

[ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Shocker ]

Posted by California_Dragon on January 15, 2002 at 19:01:56:

In Reply to: Re: MY ECLIPSE SHOCKER IS RUNNING AT 145 PSI ??? posted by Karl_Hungus on January 15, 2002 at 18:55:13:

: : outside temp is about 55 to 60 degrees in CA...i thought shockers are supposed to run at 185 to 195 psi... i think i notice a little drop off on rapid fire with HPA and even more on CO2 ...should i be operating at 180 to 190 pressure and if so how do i get my pressure up there from 145? oh at 145 i was at 265 f.p.s. ...the field limit is 270 so to fire at 265 can i have my pressure at 185 and how to get there???? thanks if anyone can answer these questions....

: I run my turbo shocker on CO2 at 150 with 280fps with no probs. hmmm, you should have no drop off though....and you should not need a volumizer-type insert , either. you may need an internal adjustment somewhere.

: To turn up to 180, simply turn up your reg, but you wont stay below 270 if you're already at 145psi. i see your problem. If you had no drop off, i would'nt worry about it.

: I have'nt had chance to chrono my Eclipse, i'll let you know when I do...

Follow Ups:

Re: OK THANKS MAN... Karl_Hungus 19:14:13 01/15/02 (2)
- yes a preset screw in HPA tank on a remote ... California_Dragon 00:08:51 01/16/02 (1)
  - That might be your problem AreX
    11:33:43 02/02/02 (0)

Post a Followup

Show your name as:

E-Mail address (eg: joeschmoe@aol.com):

Show your e-mail address?

Your Password:

Don't have a password? CLICK HERE - Forgot your password? CLICK HERE

Subject:

Subject:Message:
: : : outside temp is about 55 to 60 degrees in CA...i thought shockers are supposed to run at 185 to 195 psi... i think i notice a little drop off on rapid fire with HPA and even more on CO2 ...should i be operating at 180 to 190 pressure and if so how do i get my pressure up there from 145? oh at 145 i was at 265 f.p.s. ...the field limit is 270 so to fire at 265 can i have my pressure at 185 and how to get there???? thanks if anyone can answer these questions.... : : I run my turbo shocker on CO2 at 150 with 280fps with no probs. hmmm, you should have no drop off though....and you should not need a volumizer-type insert , either. you may need an internal adjustment somewhere. : : To turn up to 180, simply turn up your reg, but you wont stay below 270 if you're already at 145psi. i see your problem. If you had no drop off, i would'nt worry about it. : : I have'nt had chance to chrono my Eclipse, i'll let you know when I do...

[ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Shocker ]

Copyright © 1992-2019 Corinthian Media Services.

WARPIG's webmasters can be reached through our feedback form. All articles and images are copyrighted and may not be redistributed without the written permission of their original creators and Corinthian Media Services. The WARPIG paintball page is a collection of information and pointers to sources from around the internet and other locations. As such, Corinthian Media Services makes no claims to the trustworthiness or reliability of said information. The information contained in, and referenced by WARPIG, should not be used as a substitute for safety information from trained professionals in the paintball industry.