|
|
|
|
|
|
|
Posted by David ":" Parsons on January 24, 2002 at 15:24:29:
In Reply to: Re: MY ECLIPSE SHOCKER IS RUNNING AT 145 PSI ??? posted by
: : outside temp is about 55 to 60 degrees in CA...i thought shockers are supposed to run at 185 to 195 psi... i think i notice a little drop off on rapid fire with HPA and even more on CO2 ...should i be operating at 180 to 190 pressure and if so how do i get my pressure up there from 145? oh at 145 i was at 265 f.p.s. ...the field limit is 270 so to fire at 265 can i have my pressure at 185 and how to get there???? thanks if anyone can answer these questions.... : I run my turbo shocker on CO2 at 150 with 280fps with no probs. hmmm, you should have no drop off though....and you should not need a volumizer-type insert , either. you may need an internal adjustment somewhere. : To turn up to 180, simply turn up your reg, but you wont stay below 270 if you're already at 145psi. i see your problem. If you had no drop off, i would'nt worry about it. : I have'nt had chance to chrono my Eclipse, i'll let you know when I do...