| |
Email This Page |
|
|
It would work BRIEFLY
In Reply to: Re: Scuba Tank/Nitro Tank used for air tools posted by on January 19, 2004 at 22:14:42:
|
|
Posted by: "Head Hunter" St. Charles, Mo. suburb of St. Louis on January 22, 2004 at 12:48:43
|
Look at the CFM volume requirements to run your air tools and or the compressors CFM designed to operate them. A little math and boyles law should help you guesstimate how long a 114 tank would operate it. The next question is if the regulator in the tank can provide sufficient air flow continuously? Long enough to break some lug nuts loose? Maybe.
Don't need a regulator... You already OWN one. It is on your Raptor. Just hook the scuba, nitro straight to the fill fitting on the Raptor. All you need is a hose and fittings rated for the pressure. Now keep an eye on the max pressure rating of the raptor tank. Would want to hook it straight to 4500 psi if it was rated at 3000 psi. But scuba only runs max of 3000 so that would not be an issue. That is how many tankers hook up a scuba and nitro supply tank for long scenerio games. |
|
Follow Ups:
|