WARPIG Tech Talk - Air - You kinda answered your own question.


Home Pictures Technical Tournament Recreational Fields Stores
Beginner Info News And Articles Links Resources Video Contact Us Search

WARPIG Tech Talk - Air
You kinda answered your own question.

[ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Air ]

Posted by tamu on May 09, 2002 at 13:00:37:

In Reply to: Re: Burst Discs posted by Steve on May 09, 2002 at 11:36:05:

If they are tested at 5000psi and pass, wouldn't that explain the 5000psi burst disc? Seems pretty safe.

: : : I'm a little confused? Why on a 3000 psi tank would someone put a 5000 psi burst disc? This is the test pressure that the tank is tested to. Most burst discs are usually 600 psi over service pressure and in this case it would be 3600 psi. You can't legally fill 10% over for safety reasons and that would only be 3300 psi. This is a serious safety concern.
: : : Hydro2go

: : Actually,These tanks are tested to 2 1/2 times their rated pressure,in this case 7500 psi for a 3000psi tank. If you have an overpressure problem(Probably while filling the tank) and your low pressure burst disc fails to work(Or you don't have one) you have a Burst Disc(In this case 5000psi)which can help exhaust the pressure in your tank before it blows up in your face(Not a pretty sight).Centerflag uses a 7500psi burst disc on their 420 series 4500psi tanks and it is the only one on the tank. Hope this helps

: *Just a clarification on 3000 psi. These tanks are tested to 5/3 rated pressure which is 5000 psi. not 7500#
: Hydro2go

Follow Ups:

Re: You kinda answered your own question. Lance Sherst 22:14:56 05/09/02 (3)
- Re: You kinda answered your own question. tamu 23:15:01 05/09/02 (2)
  - Re: You kinda answered your own question. Steve "hydro2go" Gallagher 07:54:19 05/10/02 (1)
    - Re: Burst disk pressures Rat Thing
      22:29:11 06/10/02 (0)

Post a Followup

Show your name as:

E-Mail address (eg: joeschmoe@aol.com):

Show your e-mail address?

Your Password:

Don't have a password? CLICK HERE - Forgot your password? CLICK HERE

Subject:

Subject:Message:
: If they are tested at 5000psi and pass, wouldn't that explain the 5000psi burst disc? Seems pretty safe. : : : : I'm a little confused? Why on a 3000 psi tank would someone put a 5000 psi burst disc? This is the test pressure that the tank is tested to. Most burst discs are usually 600 psi over service pressure and in this case it would be 3600 psi. You can't legally fill 10% over for safety reasons and that would only be 3300 psi. This is a serious safety concern. : : : : Hydro2go : : : Actually,These tanks are tested to 2 1/2 times their rated pressure,in this case 7500 psi for a 3000psi tank. If you have an overpressure problem(Probably while filling the tank) and your low pressure burst disc fails to work(Or you don't have one) you have a Burst Disc(In this case 5000psi)which can help exhaust the pressure in your tank before it blows up in your face(Not a pretty sight).Centerflag uses a 7500psi burst disc on their 420 series 4500psi tanks and it is the only one on the tank. Hope this helps : : *Just a clarification on 3000 psi. These tanks are tested to 5/3 rated pressure which is 5000 psi. not 7500# : : Hydro2go

[ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Air ]

Copyright © 1992-2019 Corinthian Media Services.

WARPIG's webmasters can be reached through our feedback form. All articles and images are copyrighted and may not be redistributed without the written permission of their original creators and Corinthian Media Services. The WARPIG paintball page is a collection of information and pointers to sources from around the internet and other locations. As such, Corinthian Media Services makes no claims to the trustworthiness or reliability of said information. The information contained in, and referenced by WARPIG, should not be used as a substitute for safety information from trained professionals in the paintball industry.