paintballHomepaintballPicturespaintballTechnicalpaintballTournamentpaintballRecreationalpaintballFieldspaintballStorespaintball
paintballBeginner InfopaintballNews And ArticlespaintballLinkspaintballResourcespaintballVideopaintballContact UspaintballSearchpaintball
WARPIG Tech Talk - Air
Re: psi

[ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Air ]

Posted by Lance Sherst on June 06, 2002 at 22:57:34:

In Reply to: psi posted by alex_mikes on June 06, 2002 at 17:58:14:

: what does psi mean, whats the difference between 450 and 800 psi in a 68ci tank? which should i buy , they are the same price

PSI stands for "Pounds per Square Inch".The difference between 450 and 800 is the output pressure of the tank.The 450psi is normally used for a Low Pressure Marker which would operate at about 200-250psi.Rule of thumb is to have your tank input pressure about 200psi higher than the operating pressure of your marker.The 800 also refers to the output pressure of the tank,this is the normal output of most fixed output tanks.I would recommend going with the 800psi because it will work on most markers(Even LP if you use a reg)and would also be a lot easier to sell if you wanted to get a low output tank.Hope this helps


Follow Ups:



Post a Followup

Show your name as:

E-Mail address (eg: joeschmoe@aol.com):


Show your e-mail address?

Your Password:


Don't have a password? CLICK HERE - Forgot your password? CLICK HERE

Subject:

Subject:Message:


[ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Air ]

Copyright © 1992-2019 Corinthian Media Services.

WARPIG's webmasters can be reached through our feedback form.  All articles and images are copyrighted and may not be redistributed without the written permission of their original creators and Corinthian Media Services. The WARPIG paintball page is a collection of information and pointers to sources from around the internet and other locations. As such, Corinthian Media Services makes no claims to the trustworthiness or reliability of said information. The information contained in, and referenced by WARPIG, should not be used as a substitute for safety information from trained professionals in the paintball industry.