|
|
|
|
|
|
|
Posted by give_you_welts on June 27, 2002 at 15:46:42:
when you are removing the gas from a gun with a co2 remote, what is the proper way to do it without blowing the o-rings, etc. when it doesnt have the remote, you turn the tank 3/4 a turn and shoot until you cannot shoot anymore and then you unscrew. How do you do it with a remote? and what is the quick disconnect and how do i use it?
mnsparky
07:04:23 06/28/02
(2)
give_you_welts
16:23:02 06/28/02
(1)
mnsparky
13:36:29 07/07/02
(0)
Subject:Message:
| Copyright © 1992-2019
Corinthian Media Services. WARPIG's webmasters can be reached through our feedback form. All articles and images are copyrighted and may not be redistributed without the written permission of their original creators and Corinthian Media Services. The WARPIG paintball page is a collection of information and pointers to sources from around the internet and other locations. As such, Corinthian Media Services makes no claims to the trustworthiness or reliability of said information. The information contained in, and referenced by WARPIG, should not be used as a substitute for safety information from trained professionals in the paintball industry. |