|
|
|
|
|
|
|
Posted by olderthandirt on June 30, 2002 at 09:20:34:
It is still possible to find a Thunderpig vertical adapter for the Tippmann Pro-Lite or Pro-carbine? I'm attempting to install a vertical adapter/expansion chamber on my old Pro-Lite. A Tippmann tech says you can't do it because the valve has to be able to move forward and backard (true) however I have observed several Pro-Lites at various sites set up with vert adapters. I tried the Tippmann vert adapter, but it angles to the rear and doesn't leave room between the adapter port and the valve for the macro-line fittings. I want to use macro-line because it is flexible and should allow the valve to move. The Thunderpig is straight up and down.
Subject:Message:
| Copyright © 1992-2019
Corinthian Media Services. WARPIG's webmasters can be reached through our feedback form. All articles and images are copyrighted and may not be redistributed without the written permission of their original creators and Corinthian Media Services. The WARPIG paintball page is a collection of information and pointers to sources from around the internet and other locations. As such, Corinthian Media Services makes no claims to the trustworthiness or reliability of said information. The information contained in, and referenced by WARPIG, should not be used as a substitute for safety information from trained professionals in the paintball industry. |