paintballHomepaintballPicturespaintballTechnicalpaintballTournamentpaintballRecreationalpaintballFieldspaintballStorespaintball
paintballBeginner InfopaintballNews And ArticlespaintballLinkspaintballResourcespaintballVideopaintballContact UspaintballSearchpaintball
WARPIG Tech Talk - Air
Re: 68/3000 Crossfire: EMPTY at 800psi?
[ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Air ]

Posted by Davin on July 15, 2002 at 20:40:50:

In Reply to: Re: 68/3000 Crossfire: EMPTY at 800psi? posted by VMAvery on July 15, 2002 at 15:17:15:

I had a Tl that did not like to recock if the pressure was under 800, this could be your problem. When you switch to a cocker you shouldn't have a problem, they actually run 500 psi or lower. Until then if you want to run your TL a that lower pressur you can respring it for like $10 or less. Of course doing so is going to change your efficiancy.

Follow Ups:


Post a Followup

Show your name as:

E-Mail address (eg: joeschmoe@aol.com):


Show your e-mail address?

Your Password:


Don't have a password? CLICK HERE - Forgot your password? CLICK HERE

Subject:

Subject:Message:

[ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Air ]

Copyright © 1992-2019 Corinthian Media Services.

WARPIG's webmasters can be reached through our feedback form.  All articles and images are copyrighted and may not be redistributed without the written permission of their original creators and Corinthian Media Services. The WARPIG paintball page is a collection of information and pointers to sources from around the internet and other locations. As such, Corinthian Media Services makes no claims to the trustworthiness or reliability of said information. The information contained in, and referenced by WARPIG, should not be used as a substitute for safety information from trained professionals in the paintball industry.