paintballHomepaintballPicturespaintballTechnicalpaintballTournamentpaintballRecreationalpaintballFieldspaintballStorespaintball
paintballBeginner InfopaintballNews And ArticlespaintballLinkspaintballResourcespaintballVideopaintballContact UspaintballSearchpaintball
WARPIG Tech Talk - Air
Re: Nitrogen 88ci 3000 psi
[ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Air ]

Posted by Tom Sparkman on August 05, 2002 at 11:55:00:

In Reply to: Nitrogen 88ci 3000 psi posted by Coldbreeze on July 29, 2002 at 00:05:04:

: I wanted to know what is the problem with the tank when it is leaking out of the top of the valve where the pin is that u push down to release the air. The air is not coming out that bad but it was leaking. I was around 200 psi pretty low on air but i wanted to know what the problem was. Thanks Daniel

There's a seal inside (probably o-ring) that is either dirty or cut.

Tom

Follow Ups:


Post a Followup

Show your name as:

E-Mail address (eg: joeschmoe@aol.com):


Show your e-mail address?

Your Password:


Don't have a password? CLICK HERE - Forgot your password? CLICK HERE

Subject:

Subject:Message:

[ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Air ]

Copyright © 1992-2019 Corinthian Media Services.

WARPIG's webmasters can be reached through our feedback form.  All articles and images are copyrighted and may not be redistributed without the written permission of their original creators and Corinthian Media Services. The WARPIG paintball page is a collection of information and pointers to sources from around the internet and other locations. As such, Corinthian Media Services makes no claims to the trustworthiness or reliability of said information. The information contained in, and referenced by WARPIG, should not be used as a substitute for safety information from trained professionals in the paintball industry.