paintballHomepaintballPicturespaintballTechnicalpaintballTournamentpaintballRecreationalpaintballFieldspaintballStorespaintball
paintballBeginner InfopaintballNews And ArticlespaintballLinkspaintballResourcespaintballVideopaintballContact UspaintballSearchpaintball
WARPIG Tech Talk - Air
Re: Reg removal from fiber wrap tank?
[ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Air ]

Posted by Bob MacAffee on September 11, 2002 at 16:53:05:

In Reply to: Reg removal from fiber wrap tank? posted by Ftby on September 09, 2002 at 19:33:18:

: Anybody done it at home? I have a leak around the neck and would like to check the condition of the o-ring. thanks to all who reply,Al.

The easiest way I have found (depending on the shape of the regulator) is to clamp the reg into a vice and use a strap wrench on the cylinder. Be careful though, I have seen a few reg companies put loctite on the threads.

Follow Ups:


Post a Followup

Show your name as:

E-Mail address (eg: joeschmoe@aol.com):


Show your e-mail address?

Your Password:


Don't have a password? CLICK HERE - Forgot your password? CLICK HERE

Subject:

Subject:Message:

[ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Air ]

Copyright © 1992-2019 Corinthian Media Services.

WARPIG's webmasters can be reached through our feedback form.  All articles and images are copyrighted and may not be redistributed without the written permission of their original creators and Corinthian Media Services. The WARPIG paintball page is a collection of information and pointers to sources from around the internet and other locations. As such, Corinthian Media Services makes no claims to the trustworthiness or reliability of said information. The information contained in, and referenced by WARPIG, should not be used as a substitute for safety information from trained professionals in the paintball industry.