Posted by: Tom Sparkman on February 05, 2003 at 14:41:43

: I have a pure energy 68ci/3000psi tank. it was new as of 4/02....i havent used in 2 weeks, but it has been full since then. My problem is all of a sudden it starts leaking through the pressure guage....I havent touched it even in those 2 weeks. Just wondering wht i can do to fix it. Thanks, zAc If it's the gauge that's leaking, you can replace it. If it's leaking around the gauge threads (use some soapy water to see where it's leaking out of), you can try putting some teflon tape on the threads and re-install the gauge. Don't get any tape past the threads or inside - it can clog it up. Tom

Follow Ups: Post a Followup Show your name as: DefaultRealnameBothNickname E-Mail address (eg: joeschmoe@aol.com): Show your e-mail address? DefaultYesNo Your Password: Don't have a password? CLICK HERE - Forgot your password? CLICK HERE Subject: Subject:Message: : : I have a pure energy 68ci/3000psi tank. it was new as of 4/02....i havent used in 2 weeks, but it has been full since then. My problem is all of a sudden it starts leaking through the pressure guage....I havent touched it even in those 2 weeks. Just wondering wht i can do to fix it. Thanks, zAc : If it's the gauge that's leaking, you can replace it. If it's leaking around the gauge threads (use some soapy water to see where it's leaking out of), you can try putting some teflon tape on the threads and re-install the gauge. Don't get any tape past the threads or inside - it can clog it up. : Tom [ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Air ]