Posted by: Ppyromann on February 07, 2003 at 15:17:15

I just picked up a new gun with a 4500 max flow (2000) and a warp feed. The problem is the warp feed gets in the way of the fill nipple. Is it safe to put an elbow between the fill nipple and the tank. Does anyone know the pressure rating on the standard 1/8" npt street elbows commonly found at paintball stores? My other option would be to swap the fill nipple and the tank gauge around, would this work on the max flow? Thx, Ppyromann

Follow Ups: Post a Followup Show your name as: DefaultRealnameBothNickname E-Mail address (eg: joeschmoe@aol.com): Show your e-mail address? DefaultYesNo Your Password: Don't have a password? CLICK HERE - Forgot your password? CLICK HERE Subject: Subject:Message: : I just picked up a new gun with a 4500 max flow (2000) and a warp feed. The problem is the warp feed gets in the way of the fill nipple. Is it safe to put an elbow between the fill nipple and the tank. Does anyone know the pressure rating on the standard 1/8" npt street elbows commonly found at paintball stores? My other option would be to swap the fill nipple and the tank gauge around, would this work on the max flow? : Thx, Ppyromann [ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Air ]