Posted by: singleshot on March 09, 2003 at 11:43:30

I'm using an x-cradle with on/off, the extended version on my cocker. I have a crossfire 4500/68ci tank. My problem is as you screw in the tank it pressurizes the gun, so basically the on/off is no use. I have taken the on/off completely apart and lubed it to make sure it slides all the way back and it does. I have a standard x-system on/off that I bought 3-4 months before this one on another gun and it works perfectly. The new ones valve is double 0-ringed and at least 1/8" longer the older on has a single o-ring. Should I grind down the tip of the valve to try to make it work, or try something else. Thanks for any help.

Follow Ups: Post a Followup Show your name as: DefaultRealnameBothNickname E-Mail address (eg: joeschmoe@aol.com): Show your e-mail address? DefaultYesNo Your Password: Don't have a password? CLICK HERE - Forgot your password? CLICK HERE Subject: Subject:Message: : I'm using an x-cradle with on/off, the extended version on my cocker. I have a crossfire 4500/68ci tank. My problem is as you screw in the tank it pressurizes the gun, so basically the on/off is no use. I have taken the on/off completely apart and lubed it to make sure it slides all the way back and it does. I have a standard x-system on/off that I bought 3-4 months before this one on another gun and it works perfectly. The new ones valve is double 0-ringed and at least 1/8" longer the older on has a single o-ring. Should I grind down the tip of the valve to try to make it work, or try something else. Thanks for any help. [ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Air ]