Posted by: PigTech on April 02, 2003 at 14:53:29 Forum Moderator

: I was thinking about putting a Maddman rocket valve on my spyder flash. the valve is supposed to bring the operating pressure down to around 250 psi. if i put this on my marker would i need to get a tank that has a regulator that can go thatlow or would something with a preset 850 psi work Changing the valve on your paintgun will not lower its pressure. It can in many cases lower the pressure at which your paintgun is capable of still functioning properly. To lower the pressure you'll either need to put an inline regulator between the air system and the paintgun, or use an adjustable output air system. See you on the field, -Bill Mills

Follow Ups: Post a Followup Show your name as: DefaultRealnameBothNickname E-Mail address (eg: joeschmoe@aol.com): Show your e-mail address? DefaultYesNo Your Password: Don't have a password? CLICK HERE - Forgot your password? CLICK HERE Subject: Subject:Message: : : I was thinking about putting a Maddman rocket valve on my spyder flash. the valve is supposed to bring the operating pressure down to around 250 psi. if i put this on my marker would i need to get a tank that has a regulator that can go thatlow or would something with a preset 850 psi work : : Changing the valve on your paintgun will not lower its pressure. It can in many cases lower the pressure at which your paintgun is capable of still functioning properly. : To lower the pressure you'll either need to put an inline regulator between the air system and the paintgun, or use an adjustable output air system. : See you on the field, : -Bill Mills [ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Air ]