|
|
|
|
|
|
|
|
Re: EVERYTHING on regulators ;P
In Reply to: EVERYTHING on regulators ;P posted by QamcA on July 11, 2003 at 06:12:34:
|
|
Posted by: Nobie "NoBull " Redmon on July 11, 2003 at 16:02:38
|
: I'm running on CO2, I'd like to improve accuracy and gas constant pressure. I own SPyder Esprit. : I faced the choice of buing a regulator or xp chamber, but I heard regs are way better. : SO looks like I'm getting a reg. But since I'm total newbie on regs, could you ppl help me out on that? : Do all regulators run CO2 as well as HP? : And Finally: do you think I could possibly buy a reg that would not suc bigtime for less than $60?? : : Q. Question#1 no all regs do not work as well on both co2 and hpa most reg work better on hpa than co2 but in my opinion regs are better than xp chambers Question#2 the best regs are max flow and palmers reg but those regs are quite expensive one of the reg that wprk good on co2 is the wgp inline reg it is very consistent but is not externally ajustable though I have seen add ons to that reg that make it externally ajustable Hth Nobie |
|
Follow Ups:
|
| Copyright © 1992-2019
Corinthian Media Services. WARPIG's webmasters can be reached through our feedback form. All articles and images are copyrighted and may not be redistributed without the written permission of their original creators and Corinthian Media Services. The WARPIG paintball page is a collection of information and pointers to sources from around the internet and other locations. As such, Corinthian Media Services makes no claims to the trustworthiness or reliability of said information. The information contained in, and referenced by WARPIG, should not be used as a substitute for safety information from trained professionals in the paintball industry. |