Posted by: Tom_J. "ap0c" Miller on February 07, 2003 at 20:21:15

Just to give you an idea on the size of the blazer, here is a pic of an extremely compact blazer (if picture does not show up, copy and paste the URL below into your browser) http://www.docsmachine.com/blazer2.jpg : : : If you want small and light...well, even a MiniCocker is a bit on the long side with all the pneumatics hanging off the front of it. They can be significantly milled down to lighten them, but there's little that can be done about length. : : : -Chad : : Length, a big problem. My reciever is 3 inches behind the barrel, that short enough for you? : 3 inches behind the barrel...impressive. The Blazer is about 5" from the back of the barrel to the velocity adjuster. The reciever itself, from the front of the vertical ASA to the velocity adjuster is about 7-1/2". Overall length with the standard 10.5" barrel is 15.5". You can also order it with an 8" barrel to shorten it to 13"...that's pretty small. Of course, the Blazer's a bit wider because the LPR and ram are side-mounted. : -Chad

Follow Ups: Post a Followup Show your name as: DefaultRealnameBothNickname E-Mail address (eg: joeschmoe@aol.com): Show your e-mail address? DefaultYesNo Your Password: Don't have a password? CLICK HERE - Forgot your password? CLICK HERE Subject: Subject:Message: : Just to give you an idea on the size of the blazer, here is a pic of an extremely compact blazer : (if picture does not show up, copy and paste the URL below into your browser) : http://www.docsmachine.com/blazer2.jpg : : : : If you want small and light...well, even a MiniCocker is a bit on the long side with all the pneumatics hanging off the front of it. They can be significantly milled down to lighten them, but there's little that can be done about length. : : : : -Chad : : : Length, a big problem. My reciever is 3 inches behind the barrel, that short enough for you? : : 3 inches behind the barrel...impressive. The Blazer is about 5" from the back of the barrel to the velocity adjuster. The reciever itself, from the front of the vertical ASA to the velocity adjuster is about 7-1/2". Overall length with the standard 10.5" barrel is 15.5". You can also order it with an 8" barrel to shorten it to 13"...that's pretty small. Of course, the Blazer's a bit wider because the LPR and ram are side-mounted. : : -Chad [ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - High End Paintguns ]