Posted by: Jeff "ShooterJM" Marjamaa on April 25, 2003 at 16:30:50

: fact - a properly tuned autococker with a good feed system can outshoot a standard 12v revvy fairly easily if it has an experienced shooter tapping the trigger. Experienced shooter, well tuned cocker, yeah I could see that happening. : fact - aforementioned cocker attached to eggolution er Evolution revvy can come damn close to outshooting it if not outshooting it (that would place it somewhere near 17-19bps). On a slider frame, not a chance. On an electro frame? Show me data, not conjecture. Tell me the settings. Also I'd be interested in seeing a revy that can feed above 12 bps. : contended fact - a hinge trigger frame with proper tuning and a good shooter can then outshoot the revvy placing its bps somewhere closer to 20 - 22. Once again, if you can show me a revy mod that allows a revy to feed that fast I'd be much obliged. It'd save me from having to go buy a halo. You do realize that by shooting at 20bps you're saying that the entire cycling process, including loading, is .05 seconds. Bottom line is most people I see whaling away on a cocker trigger rarely go over 10bps. Even on electo frames. I agree with most of this statement, but would replace "range" with "consistancy". That being said the cocker is an excellent marker. It's just, by design, not the fastest out there.

Follow Ups: Re: What speed is the cocker capable of? Jasleth 21:25:53 04/27/03 (5) Re: What speed is the cocker capable of? PigTech 21:56:17 04/27/03 (4) Re: What speed is the cocker capable of? Jasleth 11:23:16 04/28/03 (3) Keep dreaming about having "GIANT FEET"... Ras Masyean 13:38:35 06/05/03 (2) couple of things about cockers and speed gregh 23:18:14 07/24/03 (1) I've had a couple Shaltac 17:53:17 08/06/03 (0) Speed? Aaron "RealTime" Shimons 02:07:18 04/26/03 (0) Post a Followup Show your name as: DefaultRealnameBothNickname E-Mail address (eg: joeschmoe@aol.com): Show your e-mail address? DefaultYesNo Your Password: Don't have a password? CLICK HERE - Forgot your password? CLICK HERE Subject: Subject:Message: : : fact - a properly tuned autococker with a good feed system can outshoot a standard 12v revvy fairly easily if it has an experienced shooter tapping the trigger. : Experienced shooter, well tuned cocker, yeah I could see that happening. : : fact - aforementioned cocker attached to eggolution er Evolution revvy can come damn close to outshooting it if not outshooting it (that would place it somewhere near 17-19bps). : On a slider frame, not a chance. On an electro frame? Show me data, not conjecture. Tell me the settings. Also I'd be interested in seeing a revy that can feed above 12 bps. : : contended fact - a hinge trigger frame with proper tuning and a good shooter can then outshoot the revvy placing its bps somewhere closer to 20 - 22. : Once again, if you can show me a revy mod that allows a revy to feed that fast I'd be much obliged. It'd save me from having to go buy a halo. : You do realize that by shooting at 20bps you're saying that the entire cycling process, including loading, is .05 seconds. : Bottom line is most people I see whaling away on a cocker trigger rarely go over 10bps. Even on electo frames. : I agree with most of this statement, but would replace "range" with "consistancy". : That being said the cocker is an excellent marker. It's just, by design, not the fastest out there. [ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - High End Paintguns ]