Posted by: Shaltac on September 29, 2003 at 16:56:25

Reflective eyes are like that. Not a Cocker, or an Eblade issue. Dark paint in my black delrin bolted dark annoed cocker is a no go with the eye (for example). You will need to change the eye each time you change paint color... no way I've found around it. For dark or mixed paint I also turn the eye off. You just need to use roc (front regulator) and run the ram at super low pressure - turn the pressure on the roc down till the gun quacks, then back up till it will just cock and fire (with your hand over the barrel), then give it another half turn, this will keep you from chopping paint if you get one thet didn't want to feed. Then pop your grip open and adjust the frame timing either to one of the factory presets or tweek the program yourself till the gun is slow enough for your hopper. The slowest I've had to run my Millenium / Blade combo is ~9.5bps on really irregular paint.

Follow Ups: Post a Followup Show your name as: DefaultRealnameBothNickname E-Mail address (eg: joeschmoe@aol.com): Show your e-mail address? DefaultYesNo Your Password: Don't have a password? CLICK HERE - Forgot your password? CLICK HERE Subject: Subject:Message: : Reflective eyes are like that. Not a Cocker, or an Eblade issue. Dark paint in my black delrin bolted dark annoed cocker is a no go with the eye (for example). You will need to change the eye each time you change paint color... no way I've found around it. For dark or mixed paint I also turn the eye off. You just need to use roc (front regulator) and run the ram at super low pressure - turn the pressure on the roc down till the gun quacks, then back up till it will just cock and fire (with your hand over the barrel), then give it another half turn, this will keep you from chopping paint if you get one thet didn't want to feed. Then pop your grip open and adjust the frame timing either to one of the factory presets or tweek the program yourself till the gun is slow enough for your hopper. The slowest I've had to run my Millenium / Blade combo is ~9.5bps on really irregular paint. [ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - High End Paintguns ]