Posted by: greezypete on April 18, 2004 at 20:47:26

I'm new to the bushmaster forum and bushmasters in general , but it sounds to me like you have your high pressure reg set too high. I read in a post just above this one that the pressure should be set below 200 psi. I know with a cocker that if you get the input pressure too high then the back pressure on the valve is more than the spring can open , giving you low shot fps. Try re-adjusting your input reg and see what happens.

Follow Ups: Post a Followup Show your name as: DefaultRealnameBothNickname E-Mail address (eg: joeschmoe@aol.com): Show your e-mail address? DefaultYesNo Your Password: Don't have a password? CLICK HERE - Forgot your password? CLICK HERE Subject: Subject:Message: : I'm new to the bushmaster forum and bushmasters in general , but it sounds to me like you have your high pressure reg set too high. I read in a post just above this one that the pressure should be set below 200 psi. : I know with a cocker that if you get the input pressure too high then the back pressure on the valve is more than the spring can open , giving you low shot fps. : Try re-adjusting your input reg and see what happens. [ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Bushmaster 2000 / Defiant ]