paintballHomepaintballPicturespaintballTechnicalpaintballTournamentpaintballRecreationalpaintballFieldspaintballStorespaintball
paintballBeginner InfopaintballNews And ArticlespaintballLinkspaintballResourcespaintballVideopaintballContact UspaintballSearchpaintball
WARPIG Tech Talk - Bushmaster 2000 / Defiant
Re: Answers to both questions
[ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Bushmaster 2000 / Defiant ]

Posted by Superannuated on June 08, 2001 at 00:15:16:

In Reply to: Another Defiant question. posted by juggernotcap on June 07, 2001 at 13:57:59:

The Gen X reg should work OK with a fixed output system, but you will need a vertical adapter.

The Bushy and Defiant usually run between 225 and 275 psi at 280 to 300 fps. You can lower this to the 180 psi range with the Mac Dev red valve, but the gun is a good performer at the stock pressure.

Regards,

Superannuated



Follow Ups:


Post a Followup

Show your name as:

E-Mail address (eg: joeschmoe@aol.com):


Show your e-mail address?

Your Password:


Don't have a password? CLICK HERE - Forgot your password? CLICK HERE

Subject:

Subject:Message:

[ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Bushmaster 2000 / Defiant ]

Copyright © 1992-2019 Corinthian Media Services.

WARPIG's webmasters can be reached through our feedback form.  All articles and images are copyrighted and may not be redistributed without the written permission of their original creators and Corinthian Media Services. The WARPIG paintball page is a collection of information and pointers to sources from around the internet and other locations. As such, Corinthian Media Services makes no claims to the trustworthiness or reliability of said information. The information contained in, and referenced by WARPIG, should not be used as a substitute for safety information from trained professionals in the paintball industry.