|
|
|
Posted by TippGuru on May 16, 2002 at 16:12:57:
In Reply to: Vertical Adapter leaking! posted by
: I am trying to install an expansion chamber but the vertical adapter is leaking from where it attaches to the valve. I tried the red loctite, but it leaks... A few raps of teflon tape should solve your problem. Almost every vertical adapter I have
: Should I use teflon tape? Are you supposed to let the red loctite dry before you gas up the gun? Anyone have any tips or advice?
installed in my shop has leaked in that spot
without teflon tape. Let the loctite set up at least 4 hours before you gas up.