Posted by: john_M "frigganjoyce" Joyce on January 13, 2004 at 21:36:22

Well I came across something like this a few years ago, except my screws just shot out of the gun. Anyway I called up tippmann and told them what happened and they sent me out a new valve. There is little else you could do besides retap that hole a size larger but that's to much work. A little reminder also when you reinstall the hose in the valve don't screw it in till it stops that will dent the brass part of the valve. You will see what I am talking about if you look in to the valve from the bottom.

Follow Ups: Post a Followup Show your name as: DefaultRealnameBothNickname E-Mail address (eg: joeschmoe@aol.com): Show your e-mail address? DefaultYesNo Your Password: Don't have a password? CLICK HERE - Forgot your password? CLICK HERE Subject: Subject:Message: : Well I came across something like this a few years ago, except my screws just shot out of the gun. Anyway I called up tippmann and told them what happened and they sent me out a new valve. There is little else you could do besides retap that hole a size larger but that's to much work. A little reminder also when you reinstall the hose in the valve don't screw it in till it stops that will dent the brass part of the valve. You will see what I am talking about if you look in to the valve from the bottom. [ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Model 98 / 98 Custom ]