Posted by: Tom Sparkman on February 27, 2003 at 11:39:13

: What a good way to mount a timer on the back of a 12 volt View loader hopper? I have seen many home made set up and am looking into doing something the same. I have seen the JT G.O.T timers mounted on the lids of the hoppers but dont know how the're mounted. Any help or suggestions would be appreciated. Thanks Velcro works pretty good until it gets old - It's cheap enough to replace every 6 months. The self-stick backing won't come off by itself. Mount it on the lid so the timer doesn't hang over the edge and it won't get knocked off. If you look around you can find a hand held timer for <$10. Tom

Follow Ups: Post a Followup Show your name as: DefaultRealnameBothNickname E-Mail address (eg: joeschmoe@aol.com): Show your e-mail address? DefaultYesNo Your Password: Don't have a password? CLICK HERE - Forgot your password? CLICK HERE Subject: Subject:Message: : : What a good way to mount a timer on the back of a 12 volt View loader hopper? I have seen many home made set up and am looking into doing something the same. I have seen the JT G.O.T timers mounted on the lids of the hoppers but dont know how the're mounted. Any help or suggestions would be appreciated. Thanks : Velcro works pretty good until it gets old - It's cheap enough to replace every 6 months. The self-stick backing won't come off by itself. Mount it on the lid so the timer doesn't hang over the edge and it won't get knocked off. If you look around you can find a hand held timer for <$10. : Tom [ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Miscellaneous ]