|
|
|
|
|
|
|
|
Re: Fogging problem
In Reply to: Re: Fogging problem posted by Javin on May 20, 2003 at 23:25:17:
|
|
Posted by: Razorpb on May 22, 2003 at 19:10:33
|
Wow, great price. I'm dissapointed with mine, and am sure your computer fan setup pushes more air. I think I will incorporate my existing housing but modify with a computer fan like you to get alot better flow. Razor
: : Yes thermal lenses can fog, if you get hot enough condensation will form on the inner lens, it seems to get worse as the lenses age as well, try using a head band to soak up some of the excess, I've found it to help immensely, I just use strips of an old bath towel. Have a couple on hand per day and switch them out when they get bad. The mask fans help alot as well, but the're around $50, or make your own with a small computer fan, an 9v and a switch. Hope it helps. : : Razor : :
|
|
Follow Ups:
|
| Copyright © 1992-2019
Corinthian Media Services. WARPIG's webmasters can be reached through our feedback form. All articles and images are copyrighted and may not be redistributed without the written permission of their original creators and Corinthian Media Services. The WARPIG paintball page is a collection of information and pointers to sources from around the internet and other locations. As such, Corinthian Media Services makes no claims to the trustworthiness or reliability of said information. The information contained in, and referenced by WARPIG, should not be used as a substitute for safety information from trained professionals in the paintball industry. |