Show your name as: DefaultRealnameBothNickname

E-Mail address (eg: joeschmoe@aol.com):


Show your e-mail address? DefaultYesNo

Your Password:

Don't have a password? CLICK HERE - Forgot your password? CLICK HERE

Subject:

Subject:Message:
: : : LP stands for low pressure. What you do is make you gun work at a lower OP (operating pessure). The benifets of this are that you get more shots per tank, less ball brekage, and more consistant shots, a quieter marker, and a smoother shot. If anyone is interested in this, give me or hellrazor a hollar. I will say this though, and LP setup is not cheap. Here is a list of items that must be replaced (don't have to do this all in one shot) : : : 1. LPC : : : 2. Valve Pin : : : 3. New Springs : : : 4. Reg. : : : 5. Barrel (has to be "port free" for atleast 8in. : : : 6. V/A : : : 7. Bolt : : : 8. Valve : : : 9. Polished Internals : : : Double check me on all this Dean, thanks. : : : HTH. : : You got the gist of it. I'd recommend the bolt, valve, VA, and LPC all have nice wide openings for less air restriction, thus lower pressure. Good job, Jon. You got all of it right. But you're still a failure. ::squinty eyes:: Hellrazor out. : I'm the failure? You can't eveb remember when we're leaving! Yeah, what do you think of that? yeah, so why don't you go shoot some fireworks and get in trouble. Shut you up. ::face on your computer:: lmao