Show your name as: DefaultRealnameBothNickname

E-Mail address (eg: joeschmoe@aol.com):


Show your e-mail address? DefaultYesNo

Your Password:

Don't have a password? CLICK HERE - Forgot your password? CLICK HERE

Subject:

Subject:Message:
: : : Ok, I just went back outside, and now the gun wont shoot at all... The sear wont release when its under pressure, I figured that much out...but I dont know how to fix it. Any sugguestions? : : Hey, my team had a long day of paintball, so im sure hellrazor won't be on til like 2:00. What kinda of air are you running it on, co2, most likely, but just making sure. Here's a couple of things to check in the meantime........... : : Are there any kinks in the main spring? : : Any o-rings missing? : : Does it have enough oil on it? : : Does it have too much oil on it? : : Is the sear spring worn? : : If your tank has just been filled, it is cold and the pressure is low. Let the tank warm up. : : And the below is straight from kingman.com : : Low & High Velocity : : To adjust velocity higher, turn the velocity adjuster screw clockwise. : : 1. Striker Spring. Why? : : a. If the striker spring is too short the velocity will be low. Replace with longer spring or add a spacer between the flat disc and the adjust screw. : : b. A cold tank will cause a drop in velocity. CO2 can not maintain steady pressure under very cold conditions. : : 2. Venturi Bolt. Why? : : a. If the venturi bolt has been installed upside down, the pressure will be extremely low. The balls will not travel very far possibly even dropping to the ground a couple feet away. : : Thats alot! but i hope some of it works. HTH. later. : No kinks in the spring, No O-Rings missing, probally not enough oil.... : Sear spring better not be worn already, Tank was filled 3 days ago. Hellrazor also sugguested putting in a new battery, Im gonna go try that soon. No, the bolt isnt upside down, and the spring came from a....I think 32* spring kit. And I know that the tank wasnt cold. : Im also going to go oil it. : -The Snowgod