paintballHomepaintballPicturespaintballTechnicalpaintballTournamentpaintballRecreationalpaintballFieldspaintballStorespaintball
paintballBeginner InfopaintballNews And ArticlespaintballLinkspaintballResourcespaintballVideopaintballContact UspaintballSearchpaintball
WARPIG Tech Talk - Spyder
Re: tell them

[ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Spyder ]

Posted by shadow_walker on August 15, 2002 at 18:21:22:

In Reply to: tell them posted by CockerXprt on August 15, 2002 at 16:28:48:

: the spyder needs some oil in it. hops 9. BE, whatever they use over there. just that its dry and its not catching all the time b/c the bolt and hammer are all gunked up. or they need to replace the seer b/c its worn down..

:
: Froggy
: Scenario Team Odyssey

Or it could be over oiled, not having enough friction will cause it to sputter cause there's no grip. other than that, just make sure the striker o-ring is the right one. I'm pretty sure it won't work with a tank o-ring on there. But then again, i haven't had any experience with E-99. HTH.


Follow Ups:



Post a Followup

Show your name as:

E-Mail address (eg: joeschmoe@aol.com):


Show your e-mail address?

Your Password:


Don't have a password? CLICK HERE - Forgot your password? CLICK HERE

Subject:

Subject:Message:


[ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Spyder ]

Copyright © 1992-2019 Corinthian Media Services.

WARPIG's webmasters can be reached through our feedback form.  All articles and images are copyrighted and may not be redistributed without the written permission of their original creators and Corinthian Media Services. The WARPIG paintball page is a collection of information and pointers to sources from around the internet and other locations. As such, Corinthian Media Services makes no claims to the trustworthiness or reliability of said information. The information contained in, and referenced by WARPIG, should not be used as a substitute for safety information from trained professionals in the paintball industry.