WARPIG Tech Talk - Spyder - Did you remove the valve body?


Home Pictures Technical Tournament Recreational Fields Stores
Beginner Info News And Articles Links Resources Video Contact Us Search

WARPIG Tech Talk - Spyder
Did you remove the valve body?

[ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Spyder ]

Posted by Dale DuPont on August 30, 2002 at 02:03:22:

In Reply to: Re: Recocking Problems - Clarify posted by Justin on August 28, 2002 at 21:38:58:

: I have the older 1 piece teflon, I put everything back together right, and one of the seals is bad enough that I can make it leak by blowing through the ASA...I doubt thats good :/

Will it do that with the hammer spring removed?

Did you remove the valve body?

You might have reversed it. Easy to do and it will leak like crazy.

Inspect the valve that the cup seal seats against.

Is there any nicks or dings in the edge that seals against the cup seal?

Tell me about recocking again. Won't recock manually, or pneumatically when you fire it?

Follow Ups:

Re: Did you remove the valve body? Justin "Snow_God" Allen 07:50:09 09/01/02 (1)
- I suspect the valve is in backwards Dale DuPont
  09:30:38 09/01/02 (0)

Post a Followup

Show your name as:

E-Mail address (eg: joeschmoe@aol.com):

Show your e-mail address?

Your Password:

Don't have a password? CLICK HERE - Forgot your password? CLICK HERE

Subject:

Subject:Message:
: : I have the older 1 piece teflon, I put everything back together right, and one of the seals is bad enough that I can make it leak by blowing through the ASA...I doubt thats good :/ : Will it do that with the hammer spring removed? : : Did you remove the valve body? : You might have reversed it. Easy to do and it will leak like crazy. : Inspect the valve that the cup seal seats against. : Is there any nicks or dings in the edge that seals against the cup seal? : Tell me about recocking again. Won't recock manually, or pneumatically when you fire it?

[ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Spyder ]

Copyright © 1992-2019 Corinthian Media Services.

WARPIG's webmasters can be reached through our feedback form. All articles and images are copyrighted and may not be redistributed without the written permission of their original creators and Corinthian Media Services. The WARPIG paintball page is a collection of information and pointers to sources from around the internet and other locations. As such, Corinthian Media Services makes no claims to the trustworthiness or reliability of said information. The information contained in, and referenced by WARPIG, should not be used as a substitute for safety information from trained professionals in the paintball industry.