WARPIG Tech Talk - Spyder - Re: A sensible idea??


Home Pictures Technical Tournament Recreational Fields Stores
Beginner Info News And Articles Links Resources Video Contact Us Search

WARPIG Tech Talk - Spyder
Re: A sensible idea??

[ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Spyder ]

Posted by Hellrazor on October 03, 2002 at 23:02:47:

In Reply to: Re: A sensible idea?? posted by hipboyscott on October 03, 2002 at 22:30:51:

: Say, what if you go make a new little trigger to sear contact pin so that the trigger is always is in contact with the sear, thus making it full auto.

No can do on the sear sanding. The sear is made of case hardened steel, barely 0.01" thick. Any sanding done to the sear will expose fresh, softer steel and will wear out in about 1000 shots. Now what you can do, however, is raise the sear and add a front trigger stop to take up the excess slack. As for the full auto idea, no-go as well. When you get the bolt going that fast, it's hitting about 30-35 bps, and nothing will ever feed that fast. So that one is out of the question. But I can do the trigger job and all if you'd like. Drop me a line at hellrazor@autococker.net if you're interested. Website: www.hellrazorcustoms.com Hope that helps. Hellrazor out.

Follow Ups:

Re: A sensible idea?? shadow_walker 15:32:43 10/04/02 (2)
- Don't listen to this guy, he's sniffing glue :P Hellbore 17:42:51 10/04/02 (1)
  - Re: Don't listen to this guy, he's sniffing glue :P hipboyscott
    09:23:14 10/05/02 (0)

Post a Followup

Show your name as:

E-Mail address (eg: joeschmoe@aol.com):

Show your e-mail address?

Your Password:

Don't have a password? CLICK HERE - Forgot your password? CLICK HERE

Subject:

Subject:Message:
: : Say, what if you go make a new little trigger to sear contact pin so that the trigger is always is in contact with the sear, thus making it full auto. : No can do on the sear sanding. The sear is made of case hardened steel, barely 0.01" thick. Any sanding done to the sear will expose fresh, softer steel and will wear out in about 1000 shots. Now what you can do, however, is raise the sear and add a front trigger stop to take up the excess slack. As for the full auto idea, no-go as well. When you get the bolt going that fast, it's hitting about 30-35 bps, and nothing will ever feed that fast. So that one is out of the question. But I can do the trigger job and all if you'd like. Drop me a line at hellrazor@autococker.net if you're interested. Website: www.hellrazorcustoms.com Hope that helps. Hellrazor out.

[ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Spyder ]

Copyright © 1992-2019 Corinthian Media Services.

WARPIG's webmasters can be reached through our feedback form. All articles and images are copyrighted and may not be redistributed without the written permission of their original creators and Corinthian Media Services. The WARPIG paintball page is a collection of information and pointers to sources from around the internet and other locations. As such, Corinthian Media Services makes no claims to the trustworthiness or reliability of said information. The information contained in, and referenced by WARPIG, should not be used as a substitute for safety information from trained professionals in the paintball industry.