Posted by: Shadow_Cocker on December 11, 2002 at 22:53:42

If you take the frame off of the gun you will notice a small hollowed screw sticking out of the top of the trigger. Use a small allen key to adust the screw out for a smaller pull and in for a longer one. This should be on all Storm frames and is on the many I have tinkered with. You can also adjust the sear hight by placing the inserts that come with the frame inside the solonoid casing. On some spyders using these frames you acutally need to raise the sear or sometimes you will get constant automatic fire.

Follow Ups: Post a Followup Show your name as: DefaultRealnameBothNickname E-Mail address (eg: joeschmoe@aol.com): Show your e-mail address? DefaultYesNo Your Password: Don't have a password? CLICK HERE - Forgot your password? CLICK HERE Subject: Subject:Message: : If you take the frame off of the gun you will notice a small hollowed screw sticking out of the top of the trigger. Use a small allen key to adust the screw out for a smaller pull and in for a longer one. This should be on all Storm frames and is on the many I have tinkered with. : You can also adjust the sear hight by placing the inserts that come with the frame inside the solonoid casing. On some spyders using these frames you acutally need to raise the sear or sometimes you will get constant automatic fire. [ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Spyder ]