Posted by: Jon "Jonwes" West on May 29, 2003 at 01:30:57

Theres a hole thats really messing up my trigger mods. Seems that the setscrew i installed on my spyder Xtra's trigger to control the forward slack almost exactly goes right into this unknown hole on the bottom of the gun body, making it do nothing. Anyone know what this is for? and maybe a good way to get rid of it if it's not needed? Its the hole immediately after the slot for the sear is, on the same, flat surface of the underbody of the gun, right above the trigger return spring. Any help on this greatly appreciated. TIA Jon West

Follow Ups: There is supposed to be a set screw in that hole.. Dale "Head_Hunters" DuPont 12:31:33 05/30/03 (1) Re: There is supposed to be a set screw in that hole.. Jon "Jonwes" West 12:51:56 05/30/03 (0) Post a Followup Show your name as: DefaultRealnameBothNickname E-Mail address (eg: joeschmoe@aol.com): Show your e-mail address? DefaultYesNo Your Password: Don't have a password? CLICK HERE - Forgot your password? CLICK HERE Subject: Subject:Message: : Theres a hole thats really messing up my trigger mods. Seems that the setscrew i installed on my spyder Xtra's trigger to control the forward slack almost exactly goes right into this unknown hole on the bottom of the gun body, making it do nothing. Anyone know what this is for? and maybe a good way to get rid of it if it's not needed? Its the hole immediately after the slot for the sear is, on the same, flat surface of the underbody of the gun, right above the trigger return spring. Any help on this greatly appreciated. : TIA : Jon West [ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Spyder ]