|
|
|
|
|
|
|
Posted by Joe "RedDog" Martin on June 03, 2002 at 17:24:54:
In Reply to: Springs are a toughie for the SL posted by
I'll have to look into the adapter and the Tippmann hopper, never heard of either before. I did try the Brass Eagle hopper, but it's too small. : I just begged the field owner where I've been reffing for a new mainspring for mine. It would be really nice if these things were compatible with ANYTHING else out there, but they're pretty specific. : Ben Kohnen, Limited Pump Paintball
Have Fun ~ Kevin Martin
: I run a standard 9v Revolution hopper on my SL. Tippmann makes a hopper adaptor that drops right onto the feed port. I'm pretty sure you can order them direct from Tippmann for around $5. Otherwise, I'd think a 40-round Brass Eagle hopper would fit well, or the stock 40-round Tippmann hopper.
: Hope your SL works as well for you as mine does for me!
: www.geocities.com/limitedpump
Subject:Message:
| Copyright © 1992-2019
Corinthian Media Services. WARPIG's webmasters can be reached through our feedback form. All articles and images are copyrighted and may not be redistributed without the written permission of their original creators and Corinthian Media Services. The WARPIG paintball page is a collection of information and pointers to sources from around the internet and other locations. As such, Corinthian Media Services makes no claims to the trustworthiness or reliability of said information. The information contained in, and referenced by WARPIG, should not be used as a substitute for safety information from trained professionals in the paintball industry. |