  |
|
 HomePicturesTechnicalTournamentRecreationalFieldsStores |
|
|
Beginner InfoNews
And ArticlesLinksResourcesVideoContact
UsSearch |
| |
|
|
HomePicturesTechnicalTournamentRecreationalFieldsStores |
|
|
Beginner InfoNews
And ArticlesLinksResourcesVideoContact
UsSearch |
Posted by Roger "_The Hare_" Whitacre on June 07, 2002 at 19:36:25:
In Reply to: Hrm..... posted by
One of the cheapest mods you can do to a Phantom is add a SS bottomline (Via: Tippmann, PMI, or ACI). In affect, it acts as an expantion chamber and When used with a CO2 regulator it performs just fine. However I have done some tests(Bottom line + 12g's)that suggest that lower pressure is the same as WHAT I STATED ABOVE; the recharge time is also reduced from ~5-7 seconds (standard backbottle setup) to ~1-3 seconds--With little chance for freeze ups.
Subject:Message:
| Copyright © 1992-2019
Corinthian Media Services. WARPIG's webmasters can be reached through our feedback form. All articles and images are copyrighted and may not be redistributed without the written permission of their original creators and Corinthian Media Services. The WARPIG paintball page is a collection of information and pointers to sources from around the internet and other locations. As such, Corinthian Media Services makes no claims to the trustworthiness or reliability of said information. The information contained in, and referenced by WARPIG, should not be used as a substitute for safety information from trained professionals in the paintball industry. |