Posted by: FoxWalk on February 03, 2003 at 20:28:56

I would like to have my co2 still be vertical. Is there a way to mount a reg on the side of the marker parallel with the barrel. So you can still have vertical CO2? Does some one sell mounting kits or do you have to send it off to a custom shop. : It depends. : If yours is vertical, or you get the vertical ASA, you can screw in a male. Mine hits my drop forward (I've been using my 47" N2 for the winter), but I think I have a work-around... : You can mount a female under your grip frame. It has the ASA built in. That's what I did with my Tippmann Flatline. : If you do that, don't get the ring; get the block mount. The mount screws in under your grip frame (45 anyway; I don't know about the M16 grip). : : Or you can just get the CMI ($42.85 @ www.skanine.com), and screw it into your ASA. : I don't have any personal experience with these, but I think others here have. : I was thinking about getting one to use with my vertical ASA and 4 oz CO2 when it gets warm.

Follow Ups: Post a Followup Show your name as: DefaultRealnameBothNickname E-Mail address (eg: joeschmoe@aol.com): Show your e-mail address? DefaultYesNo Your Password: Don't have a password? CLICK HERE - Forgot your password? CLICK HERE Subject: Subject:Message: : I would like to have my co2 still be vertical. Is there a way to mount a reg on the side of the marker parallel with the barrel. So you can still have vertical CO2? : Does some one sell mounting kits or do you have to send it off to a custom shop. : : It depends. : : If yours is vertical, or you get the vertical ASA, you can screw in a male. Mine hits my drop forward (I've been using my 47" N2 for the winter), but I think I have a work-around... : : You can mount a female under your grip frame. It has the ASA built in. That's what I did with my Tippmann Flatline. : : If you do that, don't get the ring; get the block mount. The mount screws in under your grip frame (45 anyway; I don't know about the M16 grip). : : : : Or you can just get the CMI ($42.85 @ www.skanine.com), and screw it into your ASA. : : I don't have any personal experience with these, but I think others here have. : : I was thinking about getting one to use with my vertical ASA and 4 oz CO2 when it gets warm. [ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Stock/Pump ]