|
|
|
|
|
|
|
Posted by Tom Sparkman on January 11, 2002 at 17:27:59:
In Reply to: LED Questions..... I need some quick info. posted by
: LED & LCD differences..... LED has air to the gripframe & has a manual dial dwell. Any other major differences? - LED has a manual dial BPS too. Tom
: Also, do all Angels need chargers or can they operate off alkiline 9v ??
: Any help is appreciated!!!!!!!!!
- Internally LED runs at ~450psi, LCD ~350psi.
- LEDs came with straight feed tube with plastic hopper adaptor instead of highrise/lowrise.
- LED SF board has semi, 3rd burst, 8rd zip (burst @ 8.75bps), FA (can get a Gabriel board with the ability to change modes using the trigger & on/off switch). LCD has 26 modes.
- All Angels need chargers, the LED and 2K LCDs have NiCads, 2K1 LCDs have NiMH.
- LED grip is smaller because no LCD panel.
Tom Sparkman
11:33:55 01/14/02
(0)