WARPIG Tech Talk - Angel / Angel LCD


Home Pictures Technical Tournament Recreational Fields Stores
Beginner Info News And Articles Links Resources Video Contact Us Search

WARPIG Tech Talk - Angel / Angel LCD
Re: AIR Question

[ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Angel / Angel LCD ]

Posted by WARPIG Tech on February 28, 2002 at 14:53:01:

In Reply to: AIR Question posted by D on February 25, 2002 at 21:01:54:

The overpressure relief valve is there to prevent the output side pressure going too high. Start by backing out the adjuster screw all the way, then filling the tank. If it still leaks out then, you may have a damaged reg seat.

Check out:

http://www.warpig.com/paintball/technical/regulators/air/index.shtml
for a complete maintenance guide.

See you on the field,
-Bill Mills

: I just got my first Angel (2k1 Dye Ironman with AIR) I bought it used (less than 10k on the counter) and when I went to air the tank today every time the tank psi got above 1300psi the little over pressure valve on the side would let loose and it would not stop until it got down to about 900 psi. I read the manual and tried to adjust the out put psi it would not move no matter how far I back the regulator set screw out. Am I doing something wrong or am I just missing something. The guy I bought it from said it worked fine the last weekend he used it. He also said if I could not figure it out to send it back and he would have his tech look at it. I would like to avoid that if it is something that I am not doing right.

Follow Ups:

Post a Followup

Show your name as:

E-Mail address (eg: joeschmoe@aol.com):

Show your e-mail address?

Your Password:

Don't have a password? CLICK HERE - Forgot your password? CLICK HERE

Subject:

Subject:Message:
: The overpressure relief valve is there to prevent the output side pressure going too high. Start by backing out the adjuster screw all the way, then filling the tank. If it still leaks out then, you may have a damaged reg seat. : Check out: : http://www.warpig.com/paintball/technical/regulators/air/index.shtml : for a complete maintenance guide. : See you on the field, : -Bill Mills : : I just got my first Angel (2k1 Dye Ironman with AIR) I bought it used (less than 10k on the counter) and when I went to air the tank today every time the tank psi got above 1300psi the little over pressure valve on the side would let loose and it would not stop until it got down to about 900 psi. I read the manual and tried to adjust the out put psi it would not move no matter how far I back the regulator set screw out. Am I doing something wrong or am I just missing something. The guy I bought it from said it worked fine the last weekend he used it. He also said if I could not figure it out to send it back and he would have his tech look at it. I would like to avoid that if it is something that I am not doing right.

[ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Angel / Angel LCD ]

Copyright © 1992-2019 Corinthian Media Services.

WARPIG's webmasters can be reached through our feedback form. All articles and images are copyrighted and may not be redistributed without the written permission of their original creators and Corinthian Media Services. The WARPIG paintball page is a collection of information and pointers to sources from around the internet and other locations. As such, Corinthian Media Services makes no claims to the trustworthiness or reliability of said information. The information contained in, and referenced by WARPIG, should not be used as a substitute for safety information from trained professionals in the paintball industry.