paintballHomepaintballPicturespaintballTechnicalpaintballTournamentpaintballRecreationalpaintballFieldspaintballStorespaintball
paintballBeginner InfopaintballNews And ArticlespaintballLinkspaintballResourcespaintballVideopaintballContact UspaintballSearchpaintball
WARPIG Tech Talk - Angel / Angel LCD
Re: Still didn't fix it.
[ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Angel / Angel LCD ]

Posted by Split on March 13, 2002 at 11:56:52:

In Reply to: Still didn't fix it. posted by Mac Attack on March 09, 2002 at 23:48:40:

: I adjusted the dwell alot and it made little differnce. The gun and reg are well oiled. I have the allen screw on the reg all the way out.

There is a problem if you turn the minireg all the way up, the pressure is to high for the ram to open it. To tune youre reg turn it all the way down and slowly turn it up as long as the fps riseswhen it stops you turn it a bit back (leave the dwell at 14). if this doesnt work make sure the lpr is set at 85-90 psi.

Follow Ups:


Post a Followup

Show your name as:

E-Mail address (eg: joeschmoe@aol.com):


Show your e-mail address?

Your Password:


Don't have a password? CLICK HERE - Forgot your password? CLICK HERE

Subject:

Subject:Message:

[ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Angel / Angel LCD ]

Copyright © 1992-2019 Corinthian Media Services.

WARPIG's webmasters can be reached through our feedback form.  All articles and images are copyrighted and may not be redistributed without the written permission of their original creators and Corinthian Media Services. The WARPIG paintball page is a collection of information and pointers to sources from around the internet and other locations. As such, Corinthian Media Services makes no claims to the trustworthiness or reliability of said information. The information contained in, and referenced by WARPIG, should not be used as a substitute for safety information from trained professionals in the paintball industry.