paintballHomepaintballPicturespaintballTechnicalpaintballTournamentpaintballRecreationalpaintballFieldspaintballStorespaintball
paintballBeginner InfopaintballNews And ArticlespaintballLinkspaintballResourcespaintballVideopaintballContact UspaintballSearchpaintball
WARPIG Tech Talk - Angel / Angel LCD
I wouldn't recommend it.
[ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Angel / Angel LCD ]

Posted by Doc Holiday on April 20, 2002 at 03:40:55:

In Reply to: Crossfire 450 PSI tank on Angel? Please answer... posted by DeckedOut on April 17, 2002 at 10:59:16:

Operating pressure on stock angel's is right about 450 psi. If you are using a pre-set 450 tank you will likely experience shootdown under rapid fire. If you have to use a pre-set tank, use an 800 psi.

-Doc



Follow Ups:


Post a Followup

Show your name as:

E-Mail address (eg: joeschmoe@aol.com):


Show your e-mail address?

Your Password:


Don't have a password? CLICK HERE - Forgot your password? CLICK HERE

Subject:

Subject:Message:

[ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Angel / Angel LCD ]

Copyright © 1992-2019 Corinthian Media Services.

WARPIG's webmasters can be reached through our feedback form.  All articles and images are copyrighted and may not be redistributed without the written permission of their original creators and Corinthian Media Services. The WARPIG paintball page is a collection of information and pointers to sources from around the internet and other locations. As such, Corinthian Media Services makes no claims to the trustworthiness or reliability of said information. The information contained in, and referenced by WARPIG, should not be used as a substitute for safety information from trained professionals in the paintball industry.