Posted by: Pat Mulligan on November 30, 2002 at 08:50:26

By the way, You'd be much batter off just having WDP or Warped Sportz fixing the wire for you if you pinched it. : Open the grip back up and make sure your battery is still properly plugged into the board. : Also, if you have a volt-meter see if you can read any current from the battery. If not, it could be that you pinched a battery wire, breaking the conductors inside. : See you on the field, : -Bill Mills : : My 2000 LCD is having some troubles. The other night I took the grip frame off and adjusted the trigger. I put it back on and started firing it, then it just shut off and it won't come back on. Before it died it showed it had about 3/4 battery. When I put it on the charger the screen lights up and gives me the "cab in" message (i don't know what the message says, I've never been able to read it.) And it continues to say it, even when the tabs out and it should be charging. : : It seems to me like it would have to be the switch or the wiring somewhere since it's acting like it's not realizing it should be on, but I've always shot a 'Cocker so I don't know... Any help would be greatly appreciated.

Follow Ups: Re: 2000 Angel LCD Won't Turn on.... The_Angel_Guy 02:12:59 01/03/03 (0) Post a Followup Show your name as: DefaultRealnameBothNickname E-Mail address (eg: joeschmoe@aol.com): Show your e-mail address? DefaultYesNo Your Password: Don't have a password? CLICK HERE - Forgot your password? CLICK HERE Subject: Subject:Message: : By the way, : You'd be much batter off just having WDP or Warped Sportz fixing the wire for you if you pinched it. : : : Open the grip back up and make sure your battery is still properly plugged into the board. : : Also, if you have a volt-meter see if you can read any current from the battery. If not, it could be that you pinched a battery wire, breaking the conductors inside. : : See you on the field, : : -Bill Mills : : : My 2000 LCD is having some troubles. The other night I took the grip frame off and adjusted the trigger. I put it back on and started firing it, then it just shut off and it won't come back on. Before it died it showed it had about 3/4 battery. When I put it on the charger the screen lights up and gives me the "cab in" message (i don't know what the message says, I've never been able to read it.) And it continues to say it, even when the tabs out and it should be charging. : : : It seems to me like it would have to be the switch or the wiring somewhere since it's acting like it's not realizing it should be on, but I've always shot a 'Cocker so I don't know... Any help would be greatly appreciated. [ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Angel / Angel LCD ]