Posted by: PigTech on December 15, 2002 at 18:01:56 Forum Moderator

: hey, I just got an ir3 and one of the external buttons is jammed. When i push it, the button goes in but won't come back out. how do I fix this problem? To start, you'll need to figure out why it is happening. If you open the grip, you can look inside and see the buttons as they press against the switches on the circuit board. Most likely it's just dirt between the button and grip body. If that's the case, lift out the circuit board (removing the screws that hold it in first :-) slide the buttons in, clean them, slide them back and put the board back. See you on the field, -Bill Mill

Follow Ups: Post a Followup Show your name as: DefaultRealnameBothNickname E-Mail address (eg: joeschmoe@aol.com): Show your e-mail address? DefaultYesNo Your Password: Don't have a password? CLICK HERE - Forgot your password? CLICK HERE Subject: Subject:Message: : : hey, I just got an ir3 and one of the external buttons is jammed. When i push it, the button goes in but won't come back out. how do I fix this problem? : To start, you'll need to figure out why it is happening. If you open the grip, you can look inside and see the buttons as they press against the switches on the circuit board. Most likely it's just dirt between the button and grip body. If that's the case, lift out the circuit board (removing the screws that hold it in first :-) slide the buttons in, clean them, slide them back and put the board back. : See you on the field, : -Bill Mill [ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Angel / Angel LCD ]