  |
|
 HomePicturesTechnicalTournamentRecreationalFieldsStores |
|
|
Beginner InfoNews
And ArticlesLinksResourcesVideoContact
UsSearch |
| |
|
|
HomePicturesTechnicalTournamentRecreationalFieldsStores |
|
|
Beginner InfoNews
And ArticlesLinksResourcesVideoContact
UsSearch |
|
Re: LP maxflow on my LCD?!
In Reply to: LP maxflow on my LCD?! posted by Josh_Adam on August 02, 2003 at 10:15:41:
|
|
Posted by: dan white on August 02, 2003 at 13:37:41
|
no you can't... angel lcd's require an input pressure of about 650 psi, thats into the inline regulator, and that bumps it down to about 500 psi, so you need the high pressure maxflow system
|
|
Follow Ups:
|
| Copyright © 1992-2019
Corinthian Media Services. WARPIG's webmasters can be reached through our feedback form. All articles and images are copyrighted and may not be redistributed without the written permission of their original creators and Corinthian Media Services. The WARPIG paintball page is a collection of information and pointers to sources from around the internet and other locations. As such, Corinthian Media Services makes no claims to the trustworthiness or reliability of said information. The information contained in, and referenced by WARPIG, should not be used as a substitute for safety information from trained professionals in the paintball industry. |