WARPIG Tech Talk - Angel / Angel LCD


Home Pictures Technical Tournament Recreational Fields Stores
Beginner Info News And Articles Links Resources Video Contact Us Search

SOLUTION

In Reply to: Re: Angel IR3 fires when powered up then fires 1/sec posted by vexius on August 29, 2003 at 23:21:08:

[ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Angel / Angel LCD ]

Posted by:
vexius
on August 30, 2003 at 09:35:03

Thanks goes out to Royal Rat Rangers for the solution on this question. Switched the red/black wire inside the grip from HOP to SOL and it solved the problem. No thanks to gh00st@aol.com who sold me this marker with the wires switched claiming it had "no problems".
: : I just got a used Angel IR3. When it is powered up, you can hear the electronic trigger fire the gun after the LED test is finished. When aired up, it actually fires the marker when powered up! Also, when you pull the trigger, the marker is holding the bolt open for 1 full second before releasing it. I reset the factory defaults on dwell, MROF, etc. by holding the two internal buttons for a couple seconds. After this "reboot" it fired again after the LED test and the marker was still restricted to 1 shot per full second. Any idea what is causing this problem?

Follow Ups:

Post a Followup

Show your name as:
E-Mail address (eg: joeschmoe@aol.com):

Show your e-mail address?
Your Password:

Don't have a password? CLICK HERE - Forgot your password? CLICK HERE
Subject:

Subject:Message:
: Thanks goes out to Royal Rat Rangers for the solution on this question. Switched the red/black wire inside the grip from HOP to SOL and it solved the problem. No thanks to gh00st@aol.com who sold me this marker with the wires switched claiming it had "no problems". : : : I just got a used Angel IR3. When it is powered up, you can hear the electronic trigger fire the gun after the LED test is finished. When aired up, it actually fires the marker when powered up! Also, when you pull the trigger, the marker is holding the bolt open for 1 full second before releasing it. I reset the factory defaults on dwell, MROF, etc. by holding the two internal buttons for a couple seconds. After this "reboot" it fired again after the LED test and the marker was still restricted to 1 shot per full second. Any idea what is causing this problem?

[ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Angel / Angel LCD ]

WARPIG's webmasters can be reached through our feedback form. All articles and images are copyrighted and may not be redistributed without the written permission of their original creators and Corinthian Media Services. The WARPIG paintball page is a collection of information and pointers to sources from around the internet and other locations. As such, Corinthian Media Services makes no claims to the trustworthiness or reliability of said information. The information contained in, and referenced by WARPIG, should not be used as a substitute for safety information from trained professionals in the paintball industry.