WARPIG Tech Talk - Autococker / Minicocker - Re: SS Braided Hose... need a very short one!!!


Home Pictures Technical Tournament Recreational Fields Stores
Beginner Info News And Articles Links Resources Video Contact Us Search

WARPIG Tech Talk - Autococker / Minicocker

Re: SS Braided Hose... need a very short one!!!

In Reply to: SS Braided Hose... need a very short one!!! posted by X on January 15, 2003 at 22:19:11:

[ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Autococker / Minicocker ]

Posted by:
Frankie OQuinn
on January 16, 2003 at 09:04:02

The fittings on most hoses are about 3/4"... so that wont leave much room for hose. Ive not seen any shorter than 4". Have you looked into rigid
Stainless tubing. You could get ss compression fittings and cut the length of hose you need. hope this helps.

Follow Ups:

Post a Followup

Show your name as:
E-Mail address (eg: joeschmoe@aol.com):

Show your e-mail address?
Your Password:

Don't have a password? CLICK HERE - Forgot your password? CLICK HERE
Subject:

Subject:Message:
: The fittings on most hoses are about 3/4"... so that wont leave much room for hose. Ive not seen any shorter than 4". Have you looked into rigid : Stainless tubing. You could get ss compression fittings and cut the length of hose you need. hope this helps.

[ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Autococker / Minicocker ]

WARPIG's webmasters can be reached through our feedback form. All articles and images are copyrighted and may not be redistributed without the written permission of their original creators and Corinthian Media Services. The WARPIG paintball page is a collection of information and pointers to sources from around the internet and other locations. As such, Corinthian Media Services makes no claims to the trustworthiness or reliability of said information. The information contained in, and referenced by WARPIG, should not be used as a substitute for safety information from trained professionals in the paintball industry.