Posted by: ghetto_red on January 19, 2003 at 14:04:32

its probably an o-ring inside the 3way. i dont no how u take the shaft out for system x 3 ways but you probably just remove the coupling and slide it out the front. Good luck and if for any reason you have to take off the 3 way just remove the reg first dont try the short cut by just removing the barbs they break very easily, i learened the hard way :-)

Follow Ups: Post a Followup Show your name as: DefaultRealnameBothNickname E-Mail address (eg: joeschmoe@aol.com): Show your e-mail address? DefaultYesNo Your Password: Don't have a password? CLICK HERE - Forgot your password? CLICK HERE Subject: Subject:Message: : its probably an o-ring inside the 3way. i dont no how u take the shaft out for system x 3 ways but you probably just remove the coupling and slide it out the front. Good luck and if for any reason you have to take off the 3 way just remove the reg first dont try the short cut by just removing the barbs they break very easily, i learened the hard way :-) [ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Autococker / Minicocker ]