WARPIG Tech Talk - Autococker / Minicocker


Home Pictures Technical Tournament Recreational Fields Stores
Beginner Info News And Articles Links Resources Video Contact Us Search

Velocity Probs?

[ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Autococker / Minicocker ]

Posted by:
Shadow_Cocker
on February 13, 2003 at 23:58:14

A cocker I just recently put together is having problems with its velocity... actually it has almost none to speak of. It is timed properly but there is very little air coming out of the barrel when you pull the trigger.
The setup im using on this gun is as follows:
Belsales hammer kit
Rat valve
Full shocktech front
Supa-Fly bolt
Freak barrel system
Im still waiting for my inline reg (Ergo) so I dont think there is any retriction of air flow going on in that respect. Its timed so the shot goes well before the cocking starts. The only thing I can think of is that maybe the springs are to hard on the valve (stock rat spring)or to light on the hammer (belsales stock).
Suggestions?

Follow Ups:

Re: Velocity Probs? tamu 10:21:45 02/14/03 (4)

Re: Velocity Probs? Shadow_Cocker 10:36:40 02/14/03 (3)

No reg could be the problem BodyByHostess 11:34:23 02/14/03 (2)

Re: No reg could be the problem Shadow_Cocker 21:45:57 02/14/03 (1)

Re: No reg could be the problem Carthage 19:14:02 02/16/03 (0)

Post a Followup

Show your name as:
E-Mail address (eg: joeschmoe@aol.com):

Show your e-mail address?
Your Password:

Don't have a password? CLICK HERE - Forgot your password? CLICK HERE
Subject:

Subject:Message:
: A cocker I just recently put together is having problems with its velocity... actually it has almost none to speak of. It is timed properly but there is very little air coming out of the barrel when you pull the trigger. : The setup im using on this gun is as follows: : Belsales hammer kit : Rat valve : Full shocktech front : Supa-Fly bolt : Freak barrel system : Im still waiting for my inline reg (Ergo) so I dont think there is any retriction of air flow going on in that respect. Its timed so the shot goes well before the cocking starts. The only thing I can think of is that maybe the springs are to hard on the valve (stock rat spring)or to light on the hammer (belsales stock). : Suggestions?

[ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Autococker / Minicocker ]

WARPIG's webmasters can be reached through our feedback form. All articles and images are copyrighted and may not be redistributed without the written permission of their original creators and Corinthian Media Services. The WARPIG paintball page is a collection of information and pointers to sources from around the internet and other locations. As such, Corinthian Media Services makes no claims to the trustworthiness or reliability of said information. The information contained in, and referenced by WARPIG, should not be used as a substitute for safety information from trained professionals in the paintball industry.