|
|
|
That's one way, but this is easier
In Reply to: suggestions on stock reg disassembly posted by Poldo on February 27, 2003 at 09:00:03:
|
Posted by: vantrepes on February 27, 2003 at 23:24:27
|
Just remove the fitting at the bottom of the reg. You can stick a flat head screw driver up through the bottom cap, and adjust it. Don't forget, turning the adjuster clockwise LOWERS the output of the reg. : Ok i am trying to take apart my stock inline to sweetspot it. in the attempt...i dont want to scratch it too much, hopefully not at all. anyway...can you cocker experts here give me some suggestions on how to get it apart? it is the bottom piece that has to come off correct?
|
Follow Ups:
|
Copyright © 1992-2019
Corinthian Media Services. WARPIG's webmasters can be reached through our feedback form. All articles and images are copyrighted and may not be redistributed without the written permission of their original creators and Corinthian Media Services. The WARPIG paintball page is a collection of information and pointers to sources from around the internet and other locations. As such, Corinthian Media Services makes no claims to the trustworthiness or reliability of said information. The information contained in, and referenced by WARPIG, should not be used as a substitute for safety information from trained professionals in the paintball industry. |