paintballHomepaintballPicturespaintballTechnicalpaintballTournamentpaintballRecreationalpaintballFieldspaintballStorespaintball
paintballBeginner InfopaintballNews And ArticlespaintballLinkspaintballResourcespaintballVideopaintballContact UspaintballSearchpaintball
WARPIG Tech Talk - Autococker / Minicocker

I thought I was HARD on equipment

In Reply to: Regulator Part ????? posted by Justin Messer on February 28, 2003 at 12:20:09:


[ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Autococker / Minicocker ]

Posted by:
Dale "Head_Hunters" DuPont
on March 01, 2003 at 10:09:39

The 8 pointed bolt head holds the ASA receiver onto the body of the cocker. O ring seal.

If it isn't too tight you can use a 4 point socket to remove it but most likely you will burger it up. Best to cough up the $12 or less and get the right socket..

You could put an angled one on like the Black Magic. Otherwise you will probably never need to take it off the marker while you own it.

I have a stock reg that needs to be rebuilt. Want to sell me the guts of your dead on for $10?


Follow Ups:


Post a Followup

Show your name as:

E-Mail address (eg: joeschmoe@aol.com):


Show your e-mail address?

Your Password:


Don't have a password? CLICK HERE - Forgot your password? CLICK HERE

Subject:

Subject:Message:


[ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Autococker / Minicocker ]


Copyright © 1992-2019 Corinthian Media Services.

WARPIG's webmasters can be reached through our feedback form.  All articles and images are copyrighted and may not be redistributed without the written permission of their original creators and Corinthian Media Services. The WARPIG paintball page is a collection of information and pointers to sources from around the internet and other locations. As such, Corinthian Media Services makes no claims to the trustworthiness or reliability of said information. The information contained in, and referenced by WARPIG, should not be used as a substitute for safety information from trained professionals in the paintball industry.