Posted by: Dale "Head_Hunters" DuPont on April 16, 2003 at 09:44:14

My 98 with a LP valve runs 300 psi out of an 18" barrel. You can add volume between the valve and Main Regulator for about $5 if you need it. Remove the front block plug and insert a short 3" tube and a cap. Not pretty but a lot cheaper than the alternative just to see if you get some improvement in performance before you spend the $$$$$$.

Follow Ups: Post a Followup Show your name as: DefaultRealnameBothNickname E-Mail address (eg: joeschmoe@aol.com): Show your e-mail address? DefaultYesNo Your Password: Don't have a password? CLICK HERE - Forgot your password? CLICK HERE Subject: Subject:Message: : My 98 with a LP valve runs 300 psi out of an 18" barrel. : You can add volume between the valve and Main Regulator for about $5 if you need it. Remove the front block plug and insert a short 3" tube and a cap. : Not pretty but a lot cheaper than the alternative just to see if you get some improvement in performance before you spend the $$$$$$. [ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Autococker / Minicocker ]