paintballHomepaintballPicturespaintballTechnicalpaintballTournamentpaintballRecreationalpaintballFieldspaintballStorespaintball
paintballBeginner InfopaintballNews And ArticlespaintballLinkspaintballResourcespaintballVideopaintballContact UspaintballSearchpaintball
WARPIG Tech Talk - Autococker / Minicocker

Re: Front Pneumatics Installation

In Reply to: Front Pneumatics Installation posted by Mtbegg on April 20, 2003 at 12:56:31:


[ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Autococker / Minicocker ]

Posted by:
Dale "Head_Hunters" DuPont
on April 20, 2003 at 19:10:05

I prefer Blue Loctite. You really don't need any on the Ram Install. Just screw it in snug.

I avoid Teflon for only this reason. If you wind up with a little piece of Teflon tape inside the Regulator, it can cause havoc.

For the same reason, I use the Loctite sparingly.

Just easier and quicker to install with a drop BLUE Loctite.

Many 3 ways are very loose in the threads. People tend to try to Loctite them or use Teflon Tape. They are loose for a reason so the 3 way body can 'float' and self align with the shaft as you pull the trigger.

Otherwise, you might 'create' a leaking 3 way.

Follow Ups:


Post a Followup

Show your name as:

E-Mail address (eg: joeschmoe@aol.com):


Show your e-mail address?

Your Password:


Don't have a password? CLICK HERE - Forgot your password? CLICK HERE

Subject:

Subject:Message:


[ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Autococker / Minicocker ]


Copyright © 1992-2019 Corinthian Media Services.

WARPIG's webmasters can be reached through our feedback form.  All articles and images are copyrighted and may not be redistributed without the written permission of their original creators and Corinthian Media Services. The WARPIG paintball page is a collection of information and pointers to sources from around the internet and other locations. As such, Corinthian Media Services makes no claims to the trustworthiness or reliability of said information. The information contained in, and referenced by WARPIG, should not be used as a substitute for safety information from trained professionals in the paintball industry.